FIZIKA B 2 (1993) 2, 83-90

size 747 kBsize 1415 kB

MECHANICAL AND ELECTRICAL INNOVATIONS
IN THE DESIGN OF THE HORIZONTALLY MOUNTED
SUB-MeV VAN de GRAAFF ACCELERATOR

Work supported by Croatian Ministry of Science

NIKOLA GODINOVIĆ, JOSIP TUDORIĆ-GHEMO, IVO JERČIĆ,
MATKO JOSIPOVIĆ, LJUBOMIR KULUŠIĆ
FESB, University of Split, R. Bošković b.b., 58 000 Split, Croatia
and
JAVOR ŠKARE
"Brodograđevna industrija Split'', Put Supavla 21, 58 000 Split, Croatia

Received 28 May 1993
Revised manuscript received 23 July 1993

The construction of the insulating column of the horizontally mounted Van de Graaff accelerator has been implemented using the new composite materials with the corresponding mechanical and electrical characteristics. Three supporting bolts fix the equipotential plates and the system exhibits vanishing vibrations and a negligible decline. The low frequency stabilization of high direct voltage has been implemented controlling the spray voltage by the thyristor transducer. The signal proportional to high voltage fluctuations changes the thyristor triggering delay angle in the primary circuit of the spray generator. The mathematical model predictions of the high voltage stability are confirmed by the corresponding measurements. The achieved stability permits the proton implantation experiments and it is a reliable basis for designing high frequency stabilization even at very low energies.

UDC 539.1.07
Copyright by The Croatian Physical Society
For problems or questions please contact fizika@fizika.hfd.hr